Reclaimed Wood Nightstand Ideas

Author: jenny | Categories: Indoor comments
Wood Nightstand Pottery Barn

Reclaimed wood nightstand – A bedside table is a very functional and necessary element in any bedroom. But often many owners forget it or do not pay too much attention to its design. However, a bedside table can be a true focal point in a room, it all depends on how you manage to choose it or, better yet, to reclaimed wood nightstand. With minimal build up skills and some deliveries from your local home improvement store. And then you can easily make a bedside table that works for a bunk bed. Our example will provide a 68-inch-tall-by-22-inch wide-18-inch bedside table with three shelves for additional storage. You can paint or stain the table to coordinate with the interior design of the room

Attach decorative lists to the edges of each piece of wood. Run a string of thighs along the edge, and then firmly trim to the board with finishing nails. Cover the nails with wood kittens and allow it to dry. Gently slip both sides of each stock. Remove all grinding trash with a damp cloth. Prime and paint or bite both sides of wood. It is easier to finish wood on a flat surface than attempting to paint inside the composite table. Painting precious wood and MDF is less expensive than hard woods you can dye. But foundation and painting can take longer than applying the stain. Whichever finish you choose bedside table, finish with a layer of polyurethane for shine and protection. Allow the pieces to dry completely before assembly.

lay one of the 68-inch chipboards on a flat surface. Attach an “L” bracket to each corner, at even height with the top and edges of the board. A set of brackets will hold the top of the bunk bed table and one set will put the bottom board. Place the brackets in accordance with the flat side up at one end and the flat side down on the other.

Action 17 inches from the top end and place an “L” bracket on each side of the table to hold the first shelf. Action 17 inches from first shelf brackets and bracket for the other shelf. Remedy 17 inches again and the third shelf bracket. And on the remaining 68-inch wood board. And then attach 22-inch discs to either the end of 68-inch discs, one for the upper and one for the bottom. Insert and attach the three shelves to “L” brackets inside the nightstand. Tips and warnings reclaimed wood nightstand, secure the wardrobe on the wall or bunk bed with “L” brackets to keep it.

Comments are closed.